|
The particular advantage of the ML model
No need pre-heating and pre-cutting or other treatment of the material before extrusion.
It avoids the plastic precutting, the plastic bags and films and stretches can be fed directly in to the cutter compactor then crush, compress and heat, then it will go to the screw for plasticizing
Some washed 5-8% films can be feed directly, as it will be heated and dry in the compactor, then it will be degassed twice in the screw while plasticizing
Special designed screw and barrel, with experienced engineering we can offer and design for you the best screw and barrel to make the end pellets qualified
Cutter compactor:
As the conveyor directly connects with the compactor, the materials can follow the belt to cutter compactor, and the material will be cut and compressed. At the bottom of the cutter compactor equips with pipes with running water to cooling the material
Electricity Saving: 0.29-0.30kwh/kg
Model | ML75 | ML85 | ML100 | ML130 | ML160 | ML180 |
Screw diameter(mm) | 75 | 85 | 100 | 130 | 160 | 180 |
L/D | 26 to 33 | |||||
Output(kg/h) | 100-120 | 100-180 | 200-300 | 400-600 | 600-800 | 800-1000 |
Advanced (high efficiency with power saving)
Model | ML75B | ML85B | ML100B | ML130B | ML160B | ML180B |
Screw diameter(mm) | 75 | 85 | 100 | 130 | 160 | 180 |
L/D | 26 to 37 | |||||
Output(kg/h) | 100-150 | 200-350 | 400 to 550 | 600 to 800 | 800 to 1000 | 1000-1200 |